Mesauda MNP Mylar Flakes Opal Ride 0.3gr - iridescent flakes for nail art

Mesauda MNP Mylar Flakes Opal Ride 0.3gr - iridescent flakes for nail art

Brand: MNP Nail pro   -  Product Code: HG040618   -  EAN: 8056358162732
£7.90
Description

Mesauda MNP Mylar Flakes Opal Ride 0.3gr - iridescent flakes for nail art

Thin colour flakes to brighten up your nail art.
A simple and perfect accessory for a gemstone, galaxy effect... There will be no more limits to your creativity!
Available in two variants.
Opal Fire: transparent with rich yellow/orange/pink reflections, just like the brightest opals.

How to Use

Application Mylar Flakes on Gel Polish:
After preparing the natural nail and applying preparer, primer and base as per protocol, apply the preferred semi-permanent colour and cure in a UV lamp for 2 minutes or LED lamp for 1 minute;
Apply the Mylar Flakes on the surface (all over, or only where desired), using a clean gel brush;
Press them gently onto the nail surface to make them adhere to the dispersion;
Seal with your favourite Top Coat and cure in a UV lamp for 2 minutes or LED lamp for 1 minute.

Application of Mylar Flakes on Gel Reconstruction:
After the reconstruction as per protocol, shape it by filing. Remove dust and clean with UV Gel Cleanser;
If desired apply the preferred semi-permanent colour, otherwise apply a layer of Top Coat with dispersion and polymerise in a UV lamp for 2 minutes or LED lamp for 1 minute;
Adhere the Mylar Flakes to the dispersion, using a clean gel brush;
Seal with your favourite Top Coat and polymerise in a UV lamp for 2 minutes or LED for 1 minute.

In addition, it is possible to encapsulate the Mylar Flakes inside the gel build-up. How?
Create a thin extension with the preferred build-up gel as per protocol and polymerise in a UV lamp for 2 minutes or LED for 1 minute;
Adhere the Mylar Flakes to the dispersion, pressing them gently with a clean gel brush;
Create the clamber with the preferred builder gel (in the clear shade) and finish the build-up as per protocol;
Seal with the preferred Top Coat and cure in a UV lamp for 2 minutes or LED lamp for 1 minute.